1 COG bonding machine is a device that precisely locates the IC chip on the LCD glass and binds it. The whole machine is composed of PLC+HMI as the control core. The automatic image alignment system PV310 completes the alignment data calculation of the target object. After completing the alignment and pre-compression, it is transferred from the platform to the local pressure for binding and crimping.

2 Adopt PLC control system, platform servo drive positioning, constant temperature heating method, and stainless steel hot pressing head to realize constant temperature crimping. The lower alignment method is used to crimp the IC. The product MK point is clear and automatically aligned.

3 After the equipment parameters are set according to the product requirements, the equipment automatically executes production according to various indicators.

4 Set according to different temperature, time, pressure and other data required by the product to provide data for production.

5 The system automatically detects the functions of the equipment, and displays and alarms when failures occur.

6 The software decomposes and executes various mechanical actions of the equipment, which is suitable for manual production for equipment debugging.

7 Password setting and password modification can be carried out to strengthen the confidentiality of product data and the unified management of equipment.

8 There is no need for the operator to perform temperature testing through the instrument, and the system automatically detects and tunes.

9 In the operation interface, the system will display the running status of each component and the fault alarm display.

10 The use of dual-start system and emergency stop switch can make the production process safer.

11 The system can automatically store the position of each IC, and can automatically walk to the repaired IC position as needed during operation.

12 20 kinds of product parameters can be pre-edited and stored, no need to set again when used next time, they can be called directly.

13 It can store 50 kinds of IC tray data in advance, which can be directly recalled when in use.

14 The whole machine has an automatic reset function, which can ensure that it automatically resets to the working origin under any working conditions.